t4 - lds - 0245 - 2, rev . 1 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 1 of 5 1n4614-1 C 1n4627-1e3, 1n4099-1 C 1n4135-1e3 available on commercial versions 500 mw metallurgically bonded glass zener diodes qualified per mil - prf - 19500/435 qualified levels : jan, jantx, jantxv and jans description t he 1n4099 - 1 thr ough 1n4135 - 1 and 1n4614 - 1 thr ough 1n4627 - 1 series are 500 mw, zener voltage regulators in the axial - leaded, glass do - 35 package. voltages from 1.8 to 100v in 5%, 2%, and 1% tolerances are available. they are constructed with an internal m etallurgical bond and are mil - qualified up to the jans level for high reliability applications. do - 35 (do - 204ah) package also available in : do - 213aa package ( surface mount ) 1n4099 ur -1 C 1n4135 ur -1 and 1n4614 ur -1 C 1n4627 ur -1 do - 216 package ( tabbed surface mount ) 1 pmt 4 099 C 1 pmt 4135 and 1 pmt 4614 C 1 pmt 4627 important: for th e latest information, visit our website http://www.microsemi.com . features ? jedec registered 1n4099 thr ough 1n4135 and 1n4614 thr ough 1n4627 series . ? internal metallurgical bond . ? max noise density 40 v / h z fo r 6.8 v and up. falls quickly to 1 v / h z at lower voltages. ? jan, jantx, jantxv and jans qualification s are available per mil - prf - 19500/435 . ? rohs compliant versions available (commercial grade only) . applications / benefits ? flexible axial - lead mount ing terminals. ? regulates voltage over broad ranges of current and temperature. ? extensive selection from 1.8 to 100 volts . ? voltage tolerances of 5% (standard), 2% and 1% are available. ? hermetically sealed surface mount package . ? non - sensitive to esd per mil - std - 750 m ethod 1020 . ? minimal capacitance (see f igure 3 ). ? inherently radiation hard as described in microsemi micronote 050 . maximum ratings @ t c = +25 oc unless otherwise specified msc C law rence 6 lake street, lawrence, ma 01841 tel: 1- 800 - 446 - 1158 or (978) 620 - 2600 fax: (978) 689 - 0803 msc C ireland gort road business park, ennis, co. clare, ireland tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: www.microsemi.com pa rameters/test conditions symbol value unit junction and storage temp erature t j and t stg -6 5 to +1 75 o c thermal resistance junction - to - ambient (1) r ? ja 300 o c /w thermal resistance junction - to - lead @ 3/8 (10 mm) lead length from body r ? jl 25 0 o c /w rated average power dissipation (2) p m(av) 0.5 w for w ard voltage @ 200 ma v f 1.1 v solder temperature @ 10 s 260 o c notes : 1. w hen mounted on fr4 pc board (1 oz cu) with 4 mm 2 copper pads and track width 1 mm, length 25 mm . 2. t he 0.5 w should be linearly derated starting at t l = 5 0 c and go es to zero at 175 c. for ambient t a condition on a typical pc board, it linearly derates from 500 mw starting at 25 c and goes t o zero at 175 c (see figure 2 ). downloaded from: http:///
t4 - lds - 0245 - 2, rev . 1 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 2 of 5 1n4614-1 C 1n4627-1e3, 1n4099-1 C 1n4135-1e3 mechanical and packaging ? case: hermetically sealed axial - lead glass do - 35 (do - 204ah) style package . ? te rminals : t in - lead or rohs c ompliant annealed matte -t in (on commercial grade only) plating . s olderable per mil - std - 750, method 2026 . ? polarity: cathode indicated by band . the diode is to be operated with the banded end positive with respect to the oppo site end for zener regulation . ? marking: part number . ? tape & reel option: standard per eia - 296 (add tr suffix to part number). consult factory for quantities. ? weight: approximately 0.2 grams . ? see p ackage d imensions on last page. part nomenclature jan 1n4099 c -1 e3 reliability level jan = jan level jantx = jantx level jantxv = jantxv level jans = jans level blank = commercial jedec type number ( see electrica l characteristics t able ) zener voltage tolerance b lank = 5% c = 2% d = 1% rohs compliance e3 = rohs c ompliant ( available on commercial grade only ) blank = non - rohs c ompliant metallurgical ly bond ed symbols & definitions symbol definition vz temperature coefficient of regulator voltage: the change in regulator voltage divided by the change in temperature that caused it expressed in %/c or mv/ c. i r reverse current: the maximum reverse (leakage) current that will flow at the specified vol tage and temperature. i z , i zt , i zk regulator current: the dc regulator current (i z ), at a specified test point (i zt ), near breakdown knee (i zk ). i zm maximum regulator (zener) current: the maximum rated dc current for the specified power rat ing. n d n oise density: the noise generated over a specified frequency bandwidth usually s pecified in terms of mv/ hz. v r reverse voltage: the reverse voltage dc value, no alternating component. v z zener voltage: the z ener voltage the device will exhibit at a specified current (i z ) in its breakdown region. z zt or z zk dynamic impedance: the small signal impedance of the diode when biased to operate in its break down region at a specified rms current modulation (typically 10% of i zt or i zk ) and superimposed on i zt or i zk respectively. downloaded from: http:///
t4 - lds - 0245 - 2, rev . 1 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 3 of 5 1n4614-1 C 1n4627-1e3, 1n4099-1 C 1n4135-1e3 electrical characteristics @ 25 c unless otherwise stated industry part number * (note 1) nominal zener voltage v z @ i zt (note 2) zener test current i zt maximum zener impedance z zt (note 3) maximum reverse current i r @ v r max imum noise density n d @ i zt maximum zener current i zm maximum temp. coeff. of zener voltage vz volts a ohms a volts v/ hz ma %/ o c 1n4614 -1 1n4615 -1 1n4616 -1 1.8 2.0 2.2 250 250 250 1200 1250 1300 3.5 2.5 2.0 1 .0 1 .0 1 .0 1 1 1 120 .0 110 .0 100 .0 - 0.075 - 0.075 - 0.075 1n4617 -1 1n4618 -1 1n4619 -1 1n4620 -1 2.4 2.7 3.0 3.3 250 250 250 250 1400 1500 1600 1650 1.0 0.5 0.4 3.5 1 .0 1 .0 1 .0 1.5 1 1 1 1 95 .0 90 .0 87 .0 85 .0 - 0.075 - 0.075 - 0.075 - 0.075 1n4621 -1 1n4622 -1 1n4623 -1 1n4624 -1 3.6 3.9 4.3 4.7 250 250 2 50 250 1700 1650 1600 1550 3.5 2.5 2.0 5.0 2 .0 2 .0 2 .0 3 .0 1 1 1 1 83 .0 80 .0 77 .0 75 .0 - 0.065 - 0.060 - 0.050 - 0.0 5 0,+0.020 1n4625 -1 1n4626 -1 1n4627 -1 1n4099 -1 5.1 5.6 6.2 6.8 250 250 250 250 1500 1400 1200 200 5.0 5.0 5.0 1.0 3 .0 4 .0 5 .0 5. 2 2 4 5 40 70 .0 65 .0 61 .0 56 .0 - 0.045,+0.030 - 0.020,+0.040 - 0.010,+0.050 + 0.060 1n4100 -1 1n4101 -1 1n4102 -1 1n4103 -1 7.5 8.2 8.7 9.1 250 250 250 250 200 200 200 200 1.0 0.5 0.5 0.5 5.7 6.3 6.7 7.0 40 40 40 40 51 .0 46 .0 44 .0 42 .0 + 0. 0 65 + 0.070 + 0.075 + 0.080 1n4104 -1 1n410 5-1 1n4106 -1 1n4107 -1 10 .0 11 .0 12 .0 13 .0 250 250 250 250 200 200 200 200 0.5 0.05 0.05 0.05 7.6 8.5 9.2 9. 9 40 40 40 40 38 .0 35 .0 32 .0 29 .0 + 0.080 + 0.080 + 0.080 + 0.080 1n4108 -1 1n4109 -1 1n4110 -1 1n4111 -1 14 .0 15 .0 16 .0 17 .0 250 250 250 250 200 100 100 10 0 0.05 0.05 0.05 0.05 10.7 11.4 12.2 13.0 40 40 40 40 27 .0 25 .0 24 .0 22 .0 + 0.085 + 0.085 + 0.085 + 0.090 1n4112 -1 1n4113 -1 1n4114 -1 1n4115 -1 18 .0 19 .0 20 .0 22 .0 250 250 250 250 100 150 150 150 0.05 0.05 0.01 0.01 13.7 14.5 15.2 16.8 40 40 40 40 21 .0 20 .0 19 .0 17 .0 + 0.090 + 0.090 + 0.090 + 0.090 1n4116 -1 1n4117 -1 1n4118 -1 1n4119 -1 24 .0 25 .0 27 .0 28 .0 250 250 250 250 150 150 150 200 0.01 0.01 0.01 0.01 18.3 19.0 20.5 21.3 40 40 40 40 16 .0 15 .0 14 .0 14 .0 + 0.090 + 0.090 + 0.090 + 0.095 1n4120 -1 1n4121 -1 1n4122 -1 1n4123 -1 30 .0 33 .0 36 .0 39 .0 250 250 250 250 200 200 200 200 0.01 0.01 0.01 0.01 22.8 25.1 27.4 29.7 40 40 40 40 13 .0 12 .0 11 .0 9.8 + 0.095 + 0.095 + 0.095 + 0.095 1n4124 -1 1n4125 -1 1n4126 -1 1n4127 -1 43 .0 47 .0 51 .0 56 .0 250 250 250 250 250 250 300 300 0.01 0.01 0 .01 0.01 32.7 35.8 38.8 42.6 40 40 40 40 8.9 8.1 7.5 6.7 + 0.095 + 0.095 + 0.100 + 0.100 1n4128 -1 1n4129 -1 1n4130 -1 1n4131 -1 60 .0 62 .0 68 .0 75 .0 250 250 250 250 400 500 700 700 0.01 0.01 0.01 0.01 45.6 47.1 51.7 57.0 40 40 40 40 6.4 6.1 5.6 5.1 + 0.100 + 0.100 + 0.100 + 0.100 1n4132 -1 1n4133 -1 1n4134 -1 1n4135 -1 82 .0 87 .0 91 .0 100 .0 250 250 250 250 800 1000 1200 16 00 0.01 0.01 0.01 0.01 62.4 66.2 69.2 76.0 40 40 40 40 4.6 4.4 4.2 3.8 + 0.100 + 0.100 + 0.100 + 0.100 *jedec registered data. see notes on next page. downloaded from: http:///
t4 - lds - 0245 - 2, rev . 1 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 4 of 5 1n4614-1 C 1n4627-1e3, 1n4099-1 C 1n4135-1e3 note 1: the jedec type numbers shown in the prior table have a standard tolerance of +/ - 5% on the nominal zener voltage. v z is measured with the diode in thermal equilibrium (still air) at 25 o c. note 2: zener impedance is derived by superimposing on i zt a 60 hz rms ac current at 10% of i zt (25 a ). see micronote 202 for zener impedance variation with different operating currents. note 3: based upon 400 mw maxim um power dissipation at 25 oc lead temperature, allowance has been made for the higher voltage associated with operation at higher currents. graphs figure 1 C noise density measurement circuit noise density, (n d ) is specified in microvolt -r ms per square - root - hertz. actual measurement is performed using a 1 khz to 3 khz frequency bandpass filter at a constant zener test current (i zt ) at 25 o c ambient temperature. n d is calculated from the formula. zener voltage v z figure 3 C capacitance vs. zener voltage (typical) temperature ( o c) figure 2 C power derating curve p d rated power dissipation (m w) typical capacitance in picofarads (pf) downloaded from: http:///
t4 - lds - 0245 - 2, rev . 1 ( 5/ 31 /13 ) ?201 3 microsemi corporation page 5 of 5 1n4614-1 C 1n4627-1e3, 1n4099-1 C 1n4135-1e3 package dimensions ltr d imensions notes inch es m illimeters min max min max bd 0 .0 56 0 .090 1.42 2.29 3 bl 0 .140 0 .200 3.56 5.08 3 ld 0 .018 0 .022 0.46 0.56 ll 1.000 1.500 25.40 38.1 0 ll 1 - 0 .050 - 1.27 4 no tes: 1 . d imension s ar e in inches . 2 . m illimeter s ar e gi ven fo r informatio n onl y. 3 . packag e contou r optiona l w ithi n b d an d lengt h bl . h ea t slugs , if an y , shal l be include d w ithi n thi s cy linde r bu t shal l no t be subjec t to m inimum limi t of b d. the bl dimensio n shal l includ e th e entir e bod y including slugs. 4 . w ithi n thi s z on e lead , diamete r may v ar y to allo w fo r lea d finishe s and irregularitie s othe r tha n hea t slugs. 5 . in accordanc e w it h asme y 14.5 m, diameter s ar e equi v ale nt to x sy mbolog y. downloaded from: http:///
|